The knowledge Support BiloSatCCam 1- Dreambox • • • • • • • • • 2- Vu+ • • • • • 3- AzBox • • • • • • • 4- OPENBOX • • • • 5- SPIDERBOX • • • • • 6- QBOX • • • HOW TO: Dreambox HD Flashing firmware by Browser Flashing a new firmware by Browser What you need to flash You need the image file you want to flash. Image files have the extension *.nfi.
You can’t flash other images like *.img files. Don’t try it – it won’t work.
You need either a DHCP server and a configured bootloader You need a browser and a network cable. Connect your Dreambox to a switch/hub/router in your lokal LAN. To flash a new image, you can use the second stage loader. It must be present and not broken. The following steps assume you have a DHCP server. If you don’t have one, you have to setup an IP address (klick) in the bootloader’s serial setup. - Power down the Dreambox, either using “shutdown” and by switching off by the power switch.
You are here: Home » cccam server gratui tsamsat hd. CCCamSky offers you premium CardSharing services at the best prices. How to add cccam to dreambox, dm500 cccam, installing cccam on dm500, dm500 cccam server, server dreambox free, cccam for amiko alien 2, free cccam servers dreambox, free dreambox. Apr 15, 2012. CCcam is an applet for use in the Dreambox series of Linux-based satellite television receiver boxes. It allows your. Highlight and select 'Yes' when a confirmation window appears to begin installing the update files. Press the red. Skybox S12 HD.
Standby is not enough! - (1.) Press and hold the power button. - (2.) Switch on your Dreambox. - (3.) Your Dreambox will get the next free DHCP IP address from your router - Now, open a browser on your PC. (1.) enter in the address line “ip/”. - (2.) on the bottom of the page, there’s a link called “firmware upgrade”. - On the next page, you can select the flash image you want to flash.
Be sure that it has the “.nfi” extension. You can’t flash other images (like.img)! - Click on “FLASH!” and wait. It might take some time to upload and flash the image. - Switch the box off again, and on again. The new image should be flashed and working How to flash on web interface ( save the first line should look like this after the edit root::0:0:root:/home/root:/bin/sh then login with user root and password leave empty you could telnet and change the empty password with your own so known can easily hack into your dm box HOW TO: quick install new image & old settings in Dreambox.
You need: Total Commander or other client FTP DCC – Dreambox Control Center Flash Wizard – or other program for Flash new image. First will have to copy all programs installed and settings from DM. From FTP will copy in hdd what we have installed in/from DM: /var/bin – attention do not copy enigmanet!
Copy only CAM and SCRIPT installed! /var/etc -movieplayer_linux.xml – if exist. -movieplayer_win.xml – if exist. -satellites.xml – actual list with satellites and transponders. /var/keys – copy all.
/var/script – copy script for launch CAM and installed programs! Check in Blue Panel to see what CAM you have and check Plugins ( Tools ) to see installed programs. /var/tuxbox/config /var/tuxbox/plugins - copy all. - attention do not copy link to another directory, like link to scce! /var/uninstall – copy all. For safety write down your DM password and settings from Communication Setup. For safety make a backup copy of your image and settings with Flash Wizard.
2) Install new image. Install new image ( Flash Wizard ) and restart DM, unplug DM from AC, wait few second and plug again. If image it is correct programmed DM will start and settings menu will appear. Do not set anything. 3) Reinstall your settings and programs. From telnet change your password in DM with old one.
From FTP copy saved settings and programs in the same place. /var/bin /var/etc – optional /var/keys /var/script /var/tuxbox/config /var/tuxbox/plugins /var/uninstall Restore attribute 755 at files from: /var/bin – all /var/script -*.sh /var/tuxbox/plugins *.so /var/uninstall *.sh 4) Final. It is very important do not restart/reboot DM from menu/telnet/sw because DM will save his setting over your restored ones. Unplug DM from AC, wait few second and plug again. DM will restart with new image and ALL settings as before.
Tips * check how much space you have free in your old image, it is possible that in new image will not be the same free space for you to install all your stuff. If you don’t have enough free space do not try to reinstall from first try all the plugins. However it is important to reinstall complete dir. Vartuxboxconfigenigma * check settings in Communication; if you use DHCP and DM have all the time the same IP in the network is no problem; Other way remember that after you reprogram DM will have new default IP and password HOW TO: add more servers to your Addons. How to add more servers to your Addons ” Since Gemini canceled the support for older images all people who have a clone and use an older Gemini Image they have now to install all your addons manually but after this you can add more servers where you can download all your addons and install them over the server. I have tested only on Gemini perhaps it work on other images like nabilo or other. Open your DCC and go to var/tuxbox/config in that folder right button on useraddon.xml and chose edit select all and replace with this.
Code: example example/example.tar.gz description all example/example.jpg 523000 b9218bc1c7b71b705d7fd7f2f0dd80c6 –>Now your servers are online and you can download all you need and install ” HOW TO: E2 images Add / Remove Packages or Plugins Once you have succesfully builded your first E2 image you can start to make modifications. We will explain now howto add or remove and plugins from your image In order to add or remove packages and plugins you have to: Edit the file dreambox-image.bb rebuild the image. Note: All the packages included in the OE tree can be included or removed from your image simply editing the file that define the image content. This file is located at /dreambox /dm800/openembedded/packages/images/dreambox-image.bb and is composed in various sections. Here we will post some examples to add or remove packages and plugins: ————————- Example1: adding a package.
Add openvpn package to your image: edit the file /dreambox /dm800/openembedded/packages/images/dreambox-image.bb find the line: hotplug-ng autofs” change in: hotplug-ng autofs openvpn” ————————- Example2: removing a package. Remove samba your image: edit the file /dreambox /dm800/openembedded/packages/images/dreambox-image.bb find the line: ppp module-init-tools samba” change in: ppp module-init-tools” ————————- Example3: adding a E2 plugin. Add E2 plugin networkbrowser: edit the file /dreambox /dm800/openembedded/packages/images/dreambox-image.bb find the line: python-netserver python-pickle dreambox-blindscan-utils change in: python-netserver python-pickle dreambox-blindscan-utils enigma2-plugin-systemplugins-networkbrowser ————————- Example4: removing a E2 plugin. Removing E2 plugin cleanupwizard: edit the file /dreambox /dm800/openembedded/packages/images/dreambox-image.bb find the line: enigma2-plugin-systemplugins-cleanupwizard delete it or comment out with # Once your modification to dreambox-image.bb file are completed you can simply rebuild the image. How To: Dreambox Image Install With FlashWizard Program Dreambox Image Install With FlashWizard Program Dreambox Image Install With FlashWizard Pro 1.
Extract Flashwizard Pro to a folder of your Choice. Start Flashwizard with the FlashwizardPro.exe. Click the configuration tab and select you language 4. On the same page you’ll need to fill in the Connection Parameters at the top of the page 5. If you have not changed you password Login= root password = dreambox. To obtain your dreambox IP do the following on your dreambox remote. Menu-Setup-Expert Setup-Communication Setup.
You’ll see your IP at the top of the page make a note of this and enter this IP into Flashwizard. Also untick the DHCP box so your Dreambox IP will never change and remain static. Now click the install a firmware tab top left 8. Now click on the yellow folder, this will open a browser window Now navigate to the Dreambox image you would like to install. At the prompt select YES.
You’ll now see the image been transfered 12. And then image transfer completed. Exit Flashwizard and pull the power from you dreambox and wait for 30 seconds before reapplying power. Time to get sat in front of the TV! As your box boots you’ll see the Boot Logo Screen come up maybe a couple of times.
At the Pal Screen Select Pal or the system your TV uses and then press the green button on your remote to save. Select your language and press the ok button. Select your time zone and press the green button to save. You’ll now see the Diseqc Setup menu and have 3 options to choose from No Diseqc for a single LNB Setup. Simple For a the setup of 2 Lnb’s Complex for Diseqc 1.2 or Usuals/Goto X 19. If you want to use usuals keeps the goto x box ticked and enter your Longitude and latitude and press the green button to save. Now select Auto Transponder Scan.
This will scan all available transponders till a valid one is found. When found press green to scan. When the scan is complete press ok.At this point you can now scan another satellite with a press of the green button or red not to. Later on in this tutorial ill be explaining how to transfer channel setting so you don’t really need to.
Click exit and select a channel free to air to view.Now press the menu button-option5-reboot now, this will save your settings. That’s the flash and initial setup complete. Flashing your VU+ Duo With A USB Stick It is very simple to flash your VU+ Duo receiver using an USB stick.
Just follow these instructions: 1. Format your USB stick with a FAT32 file system 2. Create a folder “vuplus” in the root directory of the USB disk (note: this HAS to be lower case!) 3. Create a folder “duo” in the “vuplus” directory you’ve just created (again, this HAS to be lower case!) 4. Download the USB image of your choice (this is an image specific for USB flashing, you can not use the standard.nfi file!) 5. Extract the USB image (it is a.zip archive) on your PC using your favorite unzip tool 6. Copy the three files that are in the zip archive to the “duo” directory on the USB stick 7.
Switch your VU+ Duo off (power-off, not stand-by!) 8. Insert the prepared USB stick into the front of your VU+ Duo receiver 9. Switch your VU+ Duo on 10.
Follow the installation instructions on the screen VU + SOLO: HOW TO Flashing Your VU Solo BY USB Flashing Your VU Solo BY USB Format a usb flash drive to Fat32. On the USB stick create a folder and name it vuplus inside that folder create another folder and name it solo. Download the USB version of a image and unrar. Now send the boot, kernel and root file to the solo folder. Insert your USB stick in the front USB port. Then on th rear of your solo press the reset button. When the VU Solo start the standby light will be RED.
You should see the led light on your USB flashing. This shows the SOLO is reading the USB stick. After a while you’ll see the LED on your USB stop flashing. When this happens it means your SOLO is been programmed from it internal memory after reading the USB drive. When your Standby light turns green the flashing process is over and you can remove the USB stick. Install image. Download a USB image file, eg Dream Elite from Vu+ Duo Dream Elite Image Section Unzip the vuplus folder to the root directory of a USB Pen Drive.
Power off Vu+ with switch on the back Insert USB Pen Drive into the USB socket on Vu+ Power on Vu+ Image will auto install from the USB Stick. Look at the display on the receiver, it’ll display when the update has finished. Remove the USB Stick Power off receiver. Power on Receiver. Image is now installed. Network Connect an Ethernet LAN cable from your router to your Vu+ Ethernet port. Press Menu Select Set Up Select System Select Network Select Network w i z a r d and press OK.
Setup Motorised Dish using USALS First get your longitude & latitude info from multimap.com Enter your post code into multimap.com and you’ll get the correct LON & LAT info for your location. Example if I enter the following UK postal code: SE1 6JZ I get the following LON & LAT: LON: 0.104 WEST LAT: 51.497 NORTH Press Menu Select Setup Select Service searching Select Tuner configuration Select Tuner A and press OK Configuration Mode: Simple Mode: Positioner Longitude: input the info from multimap Latitude: input the info from multimap Press OK to save. Press Menu Select Setup Select service searching Select Positioner Setup Select goto 0 Press RED Button Dish should now go to 1w. Download Channel List Press Green Button Press Yellow Button (Addons) Select Addon Download Manager Select Enigma2 Settings Select Likra E2 Setting Motor and press OK. Install cam Press Green Button Press Yellow Button (Addons) Select Addons Download Manager Press OK Select Image Cams Press OK Select the cam you want to install and press OK 6.
Activate cam Press Blue button. Use Left & Right Keys to select an installed cam and press OK. This is enough to get you started, the fun starts learning the rest. How To For CCcam 2.2.1in E2 for AZbox HD ” install cccam in E2 azbox As i saw many users witk many doubths i’ll keep here again repeating som post here in satp but anyway could be easier for some guys 1-this is cccam 221 version and its very easy to install it inside E2. 2-extrat the files 3-with dcc or another one ftp software copy the files inside the folders to the same folders in azbox(not the folders just the files inside) 4-give them attributes 755 5-now in azbox put your c,n lines whatever and restart the azbox 6-now go to menu-cam-maneger and choose cccam 221 and green button and go!!!enjoy it ” cccam 221.rar (434.61 KB). Code: www.mediafire.com/?mn2jv24zmtz ” CCcam 2.1.1 Tutorial for AzBox HD 1.
Download and extract on Your PC archive Cccam 2.1.1 AzBox HD.rar 2. Connect on Your AzBox HD by FTP manager 3. Enter the /EMU directory and transfer there directory lib which is located in extracted archive on Your PC.
When transfer is finished select all files and give CHMOD 755 to them. Now, enter the OpenXCAS folder on AzBox HD receiver, so You will have /EMU/OpenXCAS, and transfer there two files: module.seq and openxcas.conf which are located in OpenXCAS folder of extracted archive. Give CHMOD 755 to that two files. Now transfer in /EMU/OpenXCAS folder named as dvbapiCAS which is located in OpenXCAs directory of extracted archive. Enter in that directory, so You will have /EMU/OpenXCAS/dvbapiCAS and give CHMOD 755 to 3 files: dvbapi.sh, dvbapi_module and openxcas.conf. Do not forget to add Your C or N lines to CCcam.cfg file which is located inside of /EMU/lib directory. After You start dvbapiCAS from Plug-ins ->OpenXCAS ->Camd activation & priority, You can test if CCcam is running by entering this in Your Web browser: azboxhdip:16001, in my Case, my AzBox HD in my LAN has IP adress 192.168.1.65, so I am entering 192.168.1.65:16001.
There are ways to load CCcam.cfg card sharing account for Dreambox using FTP and CCcam.cfg Editor, which is suitable for beginner. If you wonder how you can perform the same on OpenBox, or Skybox S9, a HD (High Definition) capable satellite decoder that have been widely dubbed as a replacement for a more relatively expensive DreamBox 800HD, here are some pretty simple steps that you can get it done. The loading method is quite different and much simpler as compared to Dreambox decoder thanks to its built-in USB 2.0 host port. And what users need to have is a USB thumbdrive (with CCcam.cfg file stored into it) plugged into the USB 2.0 host port of the decoder. If you already have those ready, follow below steps: • From the remote control, go to Menu ->Network Local Setting ->CCcam Plug Setting. • Under CCcam Plug Setting, choose ‘Update Files By USB’.
• When prompted for Add Update Files, choose CCcam.cfg (CCcam Plug) followed by Read (Yellow button) press. • Then, go to Manage Config Files ->Highlight CCcam.cfg and press OK. • By now you should see the cline server, click Active (Green button) to activate it so that they are online connected to card sharing server.
Crack 2020 Design 9. Hopefully this is simple enough and can be done even by newbies that has no such experience before. How To Load Or Setup CCcam Card Sharing On Skybox/Openbox S9 Using Remote Control. Below are some simple steps that you can follow to get them done. • Go to Menu ->CCcam Client Setup ->Manage Config Files. • And under Manage Config Files, browse to 1.
CCcam.cfg and click OK. • Press Blue button to add and you will be prompted with new screen to key in necessary information. • Key in respective information such as CCcam (under Protocol), and also the respective Host, Port, User name and Password as you gotten from card sharing server account, press yellow button (OK) and you are done. Hopefully this serves as a good alternative for those that really have no idea on how to load the CCcam file into Skybox/Openbox HD satellite decoder using thumbdrive so that you still can do it yourself without assistance from professional installers which could be costly for such an easy setup. How to upgrade OpenBox S10 HD PVR Firmware. Download the latest firmware update Backup your existing satellite settings and channels (optional) A. Go to MENU >TOOLS >DUMP BY USB.
Use left or right arrow to select MISC FILES, then arrow down to SELECT & DUMP. Press the OK key. Press the GREEN key to select TP_PROG.dbs, then press the YELLOW key to copy data to your USB.
Go to MENU >TOOLS >UPGRADE BY USB. Arrow down to “Upgrade File” and select the file you downloaded.
It will start with S10-(date).abs, for example S1.abs Then arrow down to “Start” and press the OK key. When prompted to burn flash, select “yes” and press OK key. Your S10 will reboot. Confirm successful upgrade by looking at the background image, it has changed. Configure your satellites and settings, scan, and watch TV.
If you wish to restore your previous data, see below. To restore your channels/satellite settings A. Navigate to MENU >TOOLS >UPGRADE BY USB. Then press OK key B. Press RIGHT ARROW once to change to “Misc Files”, arrow down once to “Select & upgrade”. Press OK key. Use the GREEN key on the remote to check TP_PROG.dbs, then press the YELLOW key to upgrade.
After upgrade, hit the EXIT key until you get the “No Channels” message. Use the remote to power down your S10. After 10 seconds, turn it back on, and your channels/satellite setting should be restored to the new Firmware.
Spiderbox installation guide,for Newbies. This is a small guide to get your spiderbox working. It might not be complete,and if theres anything that you feel needs, to be added or is missleading please make a post here in general discussion.
Theres 3 keys you might find handy in future so write them down on a piece of paper or save it somewhere else, but we are coming to that. 1.on the backside of your stb under the power switch, and in some cases also on carton wich it arrived in, you find the ser nr it starts with an I or 1. ´write it down on paper.´ 2.if you use a motor and not a fixed dish.go to your nearest referance sat,before you dissconect your old stb, this is probably not needed if you use usals,cause then you insert your latlongitud. But to be on the safe side. Thats is what i did. 3.connect your new Spiderbox with cables such as scart-hdmi+ypbpr lnb and networkcable etc: 4.Start it up, then press menu and go to optioncontrolpanel press Ok do your settings such as hd type-video output etc: press Exit when done, and stb autosaves. While in option choose your osd setup and time setting.
5.press Left arrow on remote to installation. Pin code is 0000 do your preferd settings such as motordiseqc switch etc: in motor settings press Green button on remote to set your longlatitud, dont forgett to pess Ok on save. Now you can search for sats. If you not use a channellist offcourse. 6.press Right arrow on remote to Accessory go to network and press 1111 to get hidden menu (IF THE HIDDEN MENU IS NOT SHOWN) then you first have to (LOAD A PATCH WITH GIFT) on it. Look belov how to load new patch after,,,,,(Finished. ) in network press Right arrow on remote Type to On.
Do your ip setup (in most cases auto is ok) ´write down your mac address´ on same paper as ser nr and press Exit. Go down to nuevoxstream press Ok then Type to On. Go down to Authorization press Ok. ´write down key´ on same paper as ser nr and mac address and save it somewhere safe.
This is the 3 keys you might find usefull in future. Now go down to register and press Ok. Now you can put in your new patchessoftcamfileschannellists.
Download extract, to a fat32 formatted usb stick. Conect usb stick to spiderbox usb and in menu go to usb and find the extracted file press Ok on it.
WHEN UPDATE TO NEW PATCH CHOOSE SW UPDATE ONLY (if you choose Sw+all data your settings dissapear) when in use of softcamfile, set both ucas to on in key edit. When in use of a cam and card on same providers as gift,, to avoid conflicts turn gift off. How to connect NewCamD - Go to Menu - Accessory - Network You can add IP = 192.168.xxx.xxx (if internal) or Host Name – xxxx.no-ip.info (if external) Port – xxxxx User name – xxxxx password – xxxx DES Key and APPLY CCcam for Spiderbox HD by usb Cfg for CCcam only by USB This is another fantastic Option of SpiderBox,,, Putting The C line in Tex just by USB. Can be similar Tex file like in DM.but in easy way not Ftp needed.ONLY USB 1 sec. You write in Tex files your C line Like C: xxx-no-ip.info 12000 user1 user2 Mean for CCcam for example CCcam Name or IP = xxx-no-i.info Port= 1200 ID=user1 Pass=user2 HOW TO: Qbox Mini HD How to Qbox Mini HD ” How and what do I do when I get the big Q-Box Mini?
HELLO EVERYONE! Here’s to all the “beginners” (not!) Some simple guides: - Update the filesystem via USB, - Settings on the first boot - Download the lineups. I hope we can help! Update file system via USB: 1.
Connect the decoder to your TV and satellite plant; 2. Do not remove the usb stick from the decoder supplied (in case of suspected damage to the stick, the formatting is recommended in “FAT32″ using a PC or replacement with a new key); 3. Download the latest update from / filesystem; 4. Crack Topsolid 2011 Gratuity. Rar file you just downloaded a program with eg winrar; 5.
Qboxhd_update save the folder onto a USB stick; 6. Put the usb stick in receiver and turn it on; 7. The update will start automatically and will end when the TV in the classic menu wizard.
Remove the memory stick inserted for the update. Settings menu wizard: The first time the decoder will be asked for basic settings. Choose the language; 2. Set your type of facility ES: One Feed (HOTBIRD) Mode config. Simple Single Mode Satellite Hot Bird 21 13.0E No InviareDiSEqC ES: Dual Feed (HOTBIRD + ASTRA) Mode config. Simple Mode DiSEqC A / B Port A Hot Bird 21 13.0E Port B 23 Astra 19.2E Config.
And Yes 22KHz InviareDiSEqC No 3. Search channels optional. If you intend to download a list of channels you do not need to search.
Installing Addons (Lineups, etc.) 1. Connect the power cable and turn on the decoder (or set the network settings menu); 2. Press Menu / Setup Menu / addons, download AddOns (green button), Duolabs Ok; 3. To list channels go to “Settings” and select your setting ES: DUALFEED / Vhannibal DUALFEED 13-19 East OK 4.
Confirm the various questions by pressing OK or the green button when prompted. Repeat the process with other AddOns that you want. When finished, exit the menu by pressing “Exit”. You may need to restart the decoder (to be performed by the menu!). RECOVERY QBOX MINI HD If the decoder does not respond and hangs on boot or reboot constantly must be made to restore the system with one of these ways: Download and install the latest version of the program for Recovery “QBoxHD_Updater” from the website First way: 1. Connect the receiver to the LAN with a LAN cable normal; 2.
Temporarily remove the firewall to protect your PC (Firewall active can cause lack of communication between your PC and QBoxHD MINI); 3. Open the software “QBoxHD Updater”; 4.
In settings make sure it is set to the ip of the pc (ie 192.168.0.3) and how to set ip QBOX any free ip (eg 192.168.0.40) (ONLY THE FIRST START, then to change these settings, press the “Program Settings”); 5. Save the settings, press the “Show Console”; 6. Press the “Recovery”; 7. Turn on the receiver while holding down the front of the Q-Box HD MINI; 8. When prompted, select the *. QHU (Al 01/12/10: “qboxhd_boot_update_2010_05_10.QHU” with Q-Box HD, “qboxhd_mini_boot_.QHU” with Q-Box Mini HD); NB: The files will find them in the folder from where it started the setup or can be downloaded from the site 9. In about 10 seconds recovery should begin; 10.
Once the recovery to proceed with updating the file system via USB. Second way: 1. Connect the decoder to the PC directly to a normal LAN cable; 2. Set the PC a static IP (eg 192.168.0.3); 3. Temporarily remove the firewall to protect your PC (Firewall active can cause lack of communication between your PC and QBoxHD); 4. Open the software “QBoxHD Updater”; 5. In settings set the ip of the pc (ie 192.168.0.3) and as a decoder ip any ip (eg 192.168.0.40) (ONLY THE FIRST START, then to change these settings, press the “Program Settings”); 6.
Save the settings, press the “Show Console”; 7. Press the “Recovery”; 8. Turn on the receiver while holding down the front of the Q-Box HD MINI. The update is necessary to implement all the bug fixes and new development done for the QBoxHD. There are two parts of Box that can be updated. Premise • Boot Update.
Boot Update will update the NOR memory inside the QBoxHD which contains Kernel, UBoot and other basic function of the QBoxhd. Boot Update files have the extension “.qhu” • File System Update.
File System is the update of the internal USB Pen of your QBoxHD. Standard sales configuration of the QBoxHD contains a 1GB USB Pen for storage of small contents or setting or third party applications.
Note: ALL UPDATE PROCEDURES MAY CHANGE ACCORDINGLY WITH DEVELOPMENT IMPROVEMENTS. MAKE SURE YOU DOWNLOAD THE LATEST UPDATED USER GUIDE OR TUTORIAL FROM THE OFFICIAL WEB SITE IN ORDER TO GET THE LAST CHANGES. Scope This procedure explains how to update the Boot Update and FileSystem Image. Scope IMPORTANT NOTE: To void versioning problems make sure the Boot Update and FileSystem Image!
Please read inside the FileSystem archive which version of Boot Image to use and viceversa. What is needed The Hardware needed to update your QBox is the following: 1. PC with Windows OS.
Windows XP and Windows Vista are supported. 1x LAN Cable. Ethernet cable can be direct or cross cable. To update the Boot Image.
And/or 1x USB Pen min. USB Pen is needed to perform the FileSystem Update only. 1x LAN Switch, HUB or Router. This is needed to maintain a stable the connection with the QBox.
On some PC running Windows Vista OS it is strongly recommended to put a LAN Switch, HUB or Router while it may not be needed on Windows XP. Boot Update will update the NOR memory inside the QBoxHD which contains Kernel, UBoot and other basic function of the QBoxHD. Boot Update files have the extension.qhu Boot Update can be done ONLY using QBox HD Updater software. Boot Update is a hard update and needs to turn OFF and then ON the QBox. Download the latest updating software version can be downloaded from the official web site or and install it on your PC. Connect the QBox to your network using cross or direct LAN cable.
It is recommended to connect the QBox to a LAN Switch, HUB or Router to prevent data loss or timeout on some Windows OS 3. Temporary remove the Window’s Firewall (this may cause failure in establishing the connection). Launch the QBox HD Updater software: The first time QBox HD Updater is launched it will ask for the IP address. To discover the IP address of your QBox please check the LAN configuration See chapters 10.7 and 10.8 Standard parameters are: Login: root Password: qboxhd (low case) At the end press “Save” and you will be directed to the main software window. To start Boot Update press the “Update Button”. Choose the.QHU file.
Turn OFF and ON the QBox and the upload will start automatically. When finished a message will appear FileSystem Update.
The most convenient and easy way to update the QBoxHD FileSystem Image is via USB Pen in stand-alone mode. Download the latest QBoxHD update file and make sure the file you are using has the correct extension.tbz 2. Uncompress the.tbz file into a blank USB Pen (FAT 32 formatted). Using WinRar. All files must be inside the folder “qboxhd_update”.
Make sure qboxhd_update folder is in the main root of the USB Pen and the files and contained in the qboxhd_update directory and not in a subdirectory. Plug the USB Pen in one of USB ports. Turn the QBoxHD OFF. Turn the QBoxHD ON. (Make sure the USB Pen is connected) 6.
Wait until the QBoxHD is booting up. When finished remove the USB Pen and turn On the QBoxHD FileSystem can be also updated via LAN. In this case follow the same procedure as the Boot Update and choose directly the.tbz file instead of.QHU Note: DO NOT TURN THE RECEIVER OFF WHILE THE UPDATE IS IN PROGRESS. IT MAY TAKE SEVERAL MINUTES!! Checking Image version.
To Check the Image version you are running follow the this procedure 1. If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu.
Navigate to the option “Information” and press the OK-Button to select. The “Information” menu will open up.
Navigate to the option “About” and press the OK-Button. This window shows all relevant information about the Hard- and Firmware of your QBoxHD. Press the OK-Button to close this menu. Look at the first line.
Enigma: Version date IMPORTANT REMINDER!! FILESYSTEM VERSION AND BOOT IMAGE VERSION BUT BE MATCHING EACH OTHER. USING AN UPDATED FILESYSTEM IMAGE AND AN OUTDATED BOOT IMAGE OR VICEVERSA MAY CAUSE SEVERAL USAGE PROBLEMS!!