System: Linux: CentOS 6.5 Kernel: Linux localhost.localdomain 2.6.32-431.1.2.0.1.el6.x86_64 #1 SMP Fri Dec 13 13:06:13 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux I selected 'Install Cable Drivers' as seen below. In the install error log (/opt/Xilinx/Vivado/2013.3/.xinstall/install.log) I am seeing the following message.
Robots to Build & Experiment and other robot products. Resident Evil 5 Gold Edition Ps3 Torrent. At RobotShop, you will find everything about robotics.
--Install log = /opt/Xilinx/Vivado/2013.3/data/xicom/cable_drivers/lin64/install_script/install_drivers/install_drivers --Installing cable drivers. --Driver versions in this package: windrvr=1301, xpc4drvr=1041 --Script name = /opt/Xilinx/Vivado/2013.3/data/xicom/cable_drivers/lin64/install_script/install_drivers/install_drivers --HostName = localhost.localdomain --Current working dir = /home/logic/Downloads/Xilinx_Vivado_SDK_2013.3_1017_1 --Script location = /home/logic/Downloads/Xilinx_Vivado_SDK_2013.3_1017_1 --Script argument=/opt/Xilinx/Vivado/2013.3/. Digilent Cable Drivers Installer error: FTDI Driver installer not found in ftdi.drivers_1.0.4-x86_64 --Kernel version = 2.6.32-431.1.2.0.1.el6.x86_64. --Arch = x86_64. --Installer version = 1100 --Unsetting ARCH environment variable. --File /lib/modules/misc/install_windrvr6 does not exist.
--Installing USB drivers------------------------------------------ --Using udev. --File /usr/share/xusbdfwu.hex does not exist. --File version of /usr/share/xusbdfwu.hex = 0000. --Updating xusbdfwu.hex file.
--File /usr/share/xusb_xlp.hex does not exist. --File version of /usr/share/xusb_xlp.hex = 0000.
Has anyone seen this issue before? It would be helpful for Xilinx to look into why things are failing, especially if Xilinx wants to push Linux on the Zynq 7000 devices. I think an important distinction may have been lost here, between: • Linux version running on a host development system (where the USB JTAG cable driver would be running) • Linux running on a target (e.g. Zynq 7000) device These are entirely different and separate sets of contexts, needs, and requirements. This aside, dyessgg's main point seems valid. Inconsequential distinctions should not be used as a blanket excuse or fig leaf for witholding meaningful user support.
-- Bob Elkind. SIGNATURE: README for newbies is here: Summary: 1. Read the manual or user guide.
Have you read the manual? Can you find the manual?
Search the forums (and search the web) for similar topics. Do not post the same question on multiple forums. Do not post a new topic or question on someone else's thread, start a new thread! Students: Copying code is not the same as learning to design.
6 'It does not work' is not a question which can be answered. Provide useful details (with webpage, datasheet links, please). You are not charged extra fees for comments in your code. I am not paid for forum posts. If I write a good post, then I have been good for nothing. Fortunately, the people over at zedboard.com are more thorough in getting things to run correctly.
Go to zedboard.com and log in (create an account if you don't already have one) 2. Click on Support 3. Click on 'Training and Videos'. Click on 'Implementing Linux on the Zynq-7000 SOC' 5.
Download the labs and unzip the file to a clean directory. Go to the lab_instructions folder and open Linux_on_Zynq_2012_Lab0_1_v05.pdf. That set of instructions walks you through step by step to set up a Centos VM with all of the tools necessary to install the Xilinx Vivado tools correctly. These same instructions can be modified for a host (non-VM) installation of Centos. The key is in the set of packages to install. If you do nothing other than go through the document and do all of the yum installs, that should be enough.
After that, do the full Vivado installation, including the JTAG cables, as you would for windows. Thanks to the people over at Zedboard for doing Xilinx's job! I left out a VERY important step. You will have to install the Vivado tools first without installing the cable drivers. The edit /opt/Xilinx/SDK/2013.x/bin/lin64/install_script/install_drivers/linux_drivers/install_drivers script. (Replace 'x' with your version of Vivado.) On line 369, change the final string from '2.4' to '2.4'.
This bug would fail on ANY 64-bit 2.6 kernel, including Red Hat. The change notes in the file itself indicates this file has not been updated since 2008. That's over 5 years ago! After that, you can run the install_drivers script to install the JTAG cables. I have another issue with the Digilent cables not being installed now. Still hunting down all of the problems.
I will post more as I hunt down the problems. PLEASE, Xilinx, make it easier for us to use a Linux host for development!
Contents • • • • Overview Use this page to help you install Diligent JTAG drivers on your computer so you can use JTAG to the Xilinx Zynq-7000 ZC702 board via the micro-USB connection. No special JTAG programmer is required, as the ZC702 development board has a USB-to-JTAG module on board. The Xilinx Zynq-7000 ZC702 development board with the USB-to-JTAG module highlighted. This tutorial is designed for people running a Ubuntu client using VMware on a Windows host. Install Diligent JTAG Drivers On Windows You will need the cable drivers on both Windows and Ubuntu (you need them on Windows so that you can do a USB pass through to the virtual machine). Download and install either Vivado Design Suite (large!) or Vivado Lab Edition (smaller install size) from on Windows.
This should install the Diligent JTAG drivers. Litecam Hd Full Free Download. Once the drivers have been installed on Windows, VMware detects the cable as “Future Devices Digilent Adept USB Device”, under VM->Removable Devices. Connect this device to the virtual machine. Plug the micro USB cable into the ZC702 dev.
Board and your computer. NOTE: On recent versions of Mac OS (as of Aug 2017), it looks like the JTAG device on the ZC-702 is recognized as a “Digilent Adept USB Device” without the installation of any additional drivers. Install Diligent JTAG Drivers And SDK On Ubuntu Download and install the SDK on Ubuntu (again, from ). This includes the xsdb program, which is located Now download and install Vivado Design Suite or Vivado Lab Edition on Ubuntu.
Vivado includes the drivers for the JTAG cable, but unlike Windows, they are NOT automatically installed on Linux. To install the drivers on Linux, once Vivado is installed (we assume it’s been installed to / opt / Xilinx /), navigate to.